Bymat 6024 RS Brush and Pad Cleaner

Key Features

  • The latest in High frequency Inverter technology
  • New sleek design and “one button” operation
  • 100% Duty cycle
  • Attractive multi-function display
  • Direct programming without the need to adjust settings
  • 5 Functions in 1 compact unit
  • Cleaning (pad and brush)
    Polishing (pad and brush)
    Dark Marking
    Light Marking/Etching
    Electro-plating
  • Quick release cables with Dince connectors
  • Complete with a comprehensive accessory kit
  • Dual input machine (110 or 230 Volt)
  • Ergonomic user friendly design
  • Environmentally friendly cleaning solutions/electrolytes
  • Robust Stainless Steel construction
  • Portable
  • Use with cleaning pad or brush system
  • Faster and less expensive than conventional cleaning methods
  • The most versatile cleaning machine on the market
  • Proven track record within the welding industry

Click Here to download a PDF data sheet

Introducing the new Bymat 6024 RS Inverter with an attractive new design, multi-function display and "one button operation".
This machine can take 110 or 230V input and gives a faster cleaning time due to the high frequency inverter technology. It also has a 100% duty cycle with no down time.
Simply select the required program and the machine will automatically set the correct voltage and current for the desired operation.

Cleaning
The Bymat will easily remove the oxide film from the weld quickly, cleanly and safely. Simply dip the pad or brush into the Electrolytic cleaning solution and wipe across the weld. The oxide film instantly disappears and the welded area is simultaneously protected against corrosion (passivated) in one operation. In comparison with cleaning and pickling with acids, this process is significantly faster and less expensive due to zero waiting time. The chemicals used for the process contains no hazardous substances and so is significantly safer than conventional chemical cleaning methods.

Electropolishing
The grey edge marks (heat-affected zones) close to the welded seams are caused by the material changes during the welding process. These can be removed without any problem using the “Polish” setting on the machine. It is possible to polish stainless steel to a high gloss finish thus returning the original lustre of the material.
 
Dark marking of electrically - conductive surfaces
Dark marking onto Stainless Steel can be performed using a template/stencil designed to your specific requirements.
The Bymat will permanently mark components deep black, easily, rapidly and inexpensively. Once marked the text or design cannot be removed by cleaning products or solvents and will not wear off. Company logos, graphics, trademarks, serial numbers, identification numbers, scales, and texts can be permanently marked.
Our high-performance electrolyte is PH neutral and requires no neutralization.

Light marking of electrically - conductive surfaces
Light marking uses the same template/stencil as for dark marking. Using a different Electrolyte we achieve a light marking effect similar to engraving. Material is removed from the component leaving your design/text permanently etched into the surface. This is suitable for materials such as black steels and aluminium for example.

Electroplating / metal plating
With this process it is possible to electroplate small areas of a component using any material which can be liquefied. For examples zinc-plating as corrosion protection after welding. Possible metal coatings: Tin, Zinc, Gold, Silver, Nickel, Chrome, Cadmium, Cobalt, Copper, Brass.

The machine is CE marked and is manufactured to meet all applicable EU directives

Comprehensive accessory kit includes:-
1 litre Electrolyte A cleaning bright steels
0.5 litre Electrolyte C polishing
20 White cleaning pads
20 Yellow polishing pads
2 wide mouth containers
Set of 3 metre cables and earth clip
60 degree anode for cleaning
90 degree anode for marking
Weld cleaning brush
100ml Embossing electrolytes
O rings

 

Demonstration Video