5 applications in one unit:
Cleaning Electropolishing Light marking Dark marking Electroplating
The most up-to-date technology and an impressive process permit a completely new method for cleaning welded seams, which puts an end to the disadvantages of mechanical or chemical processes and replaces them by an electrolytic process. This all takes place in the workshop simply, cost-effectively and cleanly. It is not harmful to man and is environmentally and product-friendly. The user-friendly 3-way switch supplies the necessary current: Cleaning / embossing dark (alternating current /AC) Polishing / embossing light (direct current/DC+) Electroplating / metal plating (direct current/DC-) The voltage regulation takes place variably via a rotary switch.

The whole set of accessories fits into one case and thereby holds everything that is needed for success.

The cleaning of welded seams on stainless steel components.

The oxide film is easily removed and the undesirable tarnish disappears, there are no unsightly edge marks – and this alone has always required a further work step. The surface is simultaneously protected from corrosion (passivated). In comparison with cleaning and pickling with acids this process is significantly cheaper. The chemicals used for the process contain no hazardous substances and are not subject to the duty of marking.

Electropolishing

The grey edge marks (heat-affected zones) close to the welded seams caused by the material changes during welding can be removed without any problem. It is possible to polish stainless steel to a high gloss thus creating a uniform surface even in the case of a 3D-reflective material.

Dark marking of electrically - conductive surfaces

Marks even cylindrical components deep black, easily, rapidly and cheaply. Because of the short reaction time of an electrolyte in connection with a template made according to your own requirements, graphics, trade marks, type plates, device numbers, identification numbers, scales, texts and logos can be permanently marked. Our high-performance electrolyte is neutral (ph 7) and requires no neutralization.

Light marking of electrically - conductive surfaces

By means of material removal in connection with a template made according to your own requirements, we achieve a light marking effect similar to engraving. This is suitable for black steels and aluminium for examples.

Electroplating / metal plating

With this process it is possible to precipitate electrolytically every material which can be liquefied. For examples zinc-plating as corrosion protection. Furthermore the welded seams can be after treated on zinc-plated components. Possible metal coatings: Tin, Zinc, Gold, Silver, Nickel, Chrome, Cadmium, Cobalt, Copper, Brass.

Technical data:

Voltage: 
Primary: 110/230 Volt, 50 -60 Hz  Secondary: 0 - 24 Volt 0-16 Ampere, 50 Hz
Dimensions: 
Width x Height x Depth:143 x 300 x *380 mm
*(Connector cable not included)

3 applications in one unit:
Cleaning: The BYMAT 1124 RS is an appliance for electrochemical cleaning of weld seems on VA steel. The fluid used is more over completely safe and environment-friendly. Electropolishing: Grey edges (heat-affected zones) can be straight forwardly removed. In this way high-grade steel can be polished to a high mirror finish. Dark marking: Marks easily, quickly and inexpensively - jet black even on cylindrical components.

Technical data:

Voltage: 
Primary: 110/230 Volt, 50 -60 Hz  Secondary: 0 - 24 Volt 0-12 Ampere, 50 Hz
Dimensions: 
Width x Height x Depth:150 x 290 x 300 mm

2 applications in one unit:
Cleaning: The BYMAT 924 RS is an appliance for electrochemical cleaning of weld seams on stainless steels. The fluid used is completely safe and environmentally friendly. Electro polishing: Grey edges (heat-affected zones) can be easily removed. In this way high-grade steel can be polished to a high mirror finish.

Technical data:

Voltage: 
Primary: 110/230 Volt, 50 -60 Hz  Secondary: 0 - 24 Volt 6.3 Ampere 50 Hz
Dimensions: 
Width x Height x Depth:125 x 225 x 275 mm